Question 1

How many health inspections has DUNKIN PC#343778 had?

Accepted Answer

DUNKIN PC#343778 has had 11 inspections according to Florida DBPR records.

Question 2

Has DUNKIN PC#343778 ever been shut down?

Accepted Answer

No, DUNKIN PC#343778 has no emergency closures on record.

Question 3

What are the most common violations at DUNKIN PC#343778?

Accepted Answer

The most frequently cited violations at DUNKIN PC#343778 are: Shell stock requirements, Parasite destruction, Toxic substance control.

Question 4

What does Florida violation V24 (Toxic substance control) mean?

Accepted Answer

TOXIC EXPOSURE: Improper identification, storage, or use of toxic substances creates immediate risk of chemical contamination. Unmarked spray bottles cause accidental food contamination. Improper pesticide application contaminates food preparation surfaces. Chemical fumes in food areas are absorbed by uncovered food. Employee exposure risks chemical burns and respiratory injury. All toxic substances must be: clearly and accurately labeled, stored in designated areas away from food, used only according to manufacturer instructions, applied only by certified personnel (pesticides). Never transfer chemicals to unlabeled containers. Keep chemicals in locked storage when not in active use. Maintain chemical inventory and SDS files.

Question 5

What does Florida violation V31 (Clean multi-use utensils) mean?

Accepted Answer

BACTERIAL BIOFILM: Improperly cleaned multi-use utensils develop bacterial biofilms within 24 hours. These biofilms protect pathogens (Listeria, Salmonella, E. coli) from routine sanitizing — requiring physical scrubbing to remove. Each use of a contaminated utensil transfers pathogens to food. Improperly cleaned cutting boards harbor 200x more bacteria than a toilet seat. Clean and sanitize all multi-use utensils using the 3-compartment sink method: Wash in hot soapy water (110°F minimum), rinse in clean water, sanitize in approved solution (50-100 ppm chlorine or 200-400 ppm quaternary ammonium for 30 seconds), air dry. Or use properly functioning commercial dishwasher. Clean utensils at least every 4 hours during continuous use.

Question 6

What does Florida violation V42 (Equipment condition) mean?

Accepted Answer

EQUIPMENT HAZARD: Equipment in poor repair harbors bacteria in cracks, chips, and corroded areas that cannot be effectively cleaned or sanitized. Frayed gaskets allow temperature loss. Malfunctioning equipment may not maintain safe temperatures. Sharp edges from damaged equipment cause injury risk. Peeling coatings can contaminate food with paint or metal flakes. Maintain all equipment in good repair: smooth, non-absorbent, easily cleanable surfaces. Replace or repair: cracked/chipped surfaces, corroded equipment, worn gaskets, malfunctioning temperature controls. Equipment must be NSF-certified or equivalent. Conduct regular equipment maintenance and document repairs. Replace equipment that cannot be restored to safe condition.

DUNKIN PC#343778

Inspection History (11)

High Priority Violations

Intermediate Violations

High Priority Violations

Intermediate Violations

Basic Violations

High Priority Violations

Basic Violations

High Priority Violations

Intermediate Violations

High Priority Violations

Intermediate Violations

Basic Violations

High Priority Violations

Intermediate Violations

Basic Violations

High Priority Violations

Intermediate Violations

High Priority Violations

High Priority Violations

Intermediate Violations

How Does This Facility Compare?

Frequently Asked Questions

Nearby Establishments

FLORIDA COAL FIRED PIZZA

SONESTA ES SUITES FORT LAUDERDALE PLANTATION

MANDARIN VILLAGE

PLANTATION PITA & GRILL

Editorial Standards & Data Oversight